Entry-level 10GbE and 2.5GbE Layer 2 Web Managed Switch for SMB Network Deployment
Easy management with web browser.
Our Price: $399.00
- QNAP QGD-1602P Switch
- 1 x Power cord
- 1 x Power adaptor
- Quick Installation Guide
The QSW-M2108-2S is a Layer 2 Web Managed Switch with two 10GbE SFP+ ports and eight 2.5 Gigabit ports. Supporting Layer 2 switching and network management via a user-friendly web user interface, the QSW-M2108-2S offers flexible deployment in hybrid high-speed network environments and provides an entry-level network management solution that is usable even by non-IT professionals. With high performance, user-friendly management, and desktop form factor, the QSW-M2108-2S enables cost-effective upgrading to 2.5GbE or 10GbE networking while optimizing bandwidth and ensuring secure network maintenance.
Includes two 10GbE SFP+ ports and eight 2.5GbE RJ45 ports for connecting various devices and enabling hybrid high-speed networks.
The QNAP Switch System (QSS) is easy to use and provides an overview dashboard, port management and setting guide, making central network management intuitive.
Provides Layer 2 management features (such as LACP, VLAN, ACL and LLDP) for IT staff to efficiently control network bandwidth and enhance security.
One of the few web-managed switches that supports Rapid Spanning Tree Protocol (RSTP). Easily and efficiently deploy small/medium-scale networks that support expansion, redundancy, and loop prevention.
Compliant with IEEE 802.3az Energy Efficient Ethernet and IEEE802.3x Flow Control in full-duplex mode, the QSW-M1208-8C avoids packet loss from unparalleled bandwidth and reduces power consumption for low-speed and inactive connections.
QSS can be updated with just one click, helping IT staff ensure their network security.
Flexible deployment with multiple 10G SFP+ fiber and Gigabit ports
The QSW-M2108-2S provides two 10GbE SFP+ ports and eight 2.5 Gigabit ports for connecting various devices and enabling hybrid high-speed networks. With SFP+ interfaces, Direct Attach Copper (DAC) cables can be used for connecting directly to SFP+ devices. You can also use RJ45 ports to connect 10GBASE-T/NBASE-T™ devices through RJ45 Category 6 (or better) cabling. The switching capacity of the QSW-M2108-2S is 80Gbps, guaranteeing the full potential of each port.
Note: 10GbE SFP+ ports are backward compatible with 1GbE SFP.
Fully embrace High-Speed Networking with QNAP!
QNAP offers comprehensive, budget-friendly storage and networking solutions that provide an array of connectivity possibilities. Easily and flexibly upgrade your workplace or home network now to handle bandwidth-hungry applications.
|A fast NAS||A QNAP NAS with multiple 2.5GbE ports and Port Trunking allows you to combine multiple ports for greater bandwidth potential.|
|Upgrade desktops and servers||Servers and desktops can install QNAP PCIe network cards that support 10G/5G/2.5G/1G/100M Multi-Gig.|
|Add a 5GbE port to laptops||Laptops and upgrade-limited computers can use the portable QNAP USB 3.2 Gen 1 to 5GbE adapter that allows you to connect to 5G/2.5G/1G/100M networks via USB.|
QSS: Intuitive Network Management Software
The QNAP Switch System (QSS) features an easy-to-use Web GUI with value-added functions to simplify network set up and management.
Use the at-a-glance major functions, flat control layers and one-click login to simplify set up and management.
The visual illustration matches physical ports for greater usability.
With the settings guide, status chart reference, online firmware update, learning and management costs are greatly reduced.
QSS: Human-centered settings guide
QSS provides an overview dashboard, port management and setting guide to help administrators control Layer 2 networks.
View real-time system information, port connection status and port traffic.
View port status, port packet statistics, and configure port speeds.
Quickly learn how to set up the network using the introduction and step-by-step guide.
Exclusive Status Chart Referencing
Refer to four major status charts during each configuration to avoid going back and forth between different setting pages.
Online Firmware Check and Update
Keep your QSW-M2108-2S secure with one-click firmware updates.
Optimize Network Performance with bandwidth and packet control
The QSW-M2108-2S provides bandwidth and packet control functions (such as LACP, VLAN, QoS, and IGMP Snooping) to boost network performance through IP grouping and bandwidth management.
|Link Aggregation (LAG) combines multiple network connections to increase throughput and protect against connection failure.||Virtual Networks (VLAN) allows groups of devices from different networks to be combined into a single network.||QoS (Quality of Service) helps prioritize bandwidth usage to optimize network resource allocation.||IGMP snooping assists in minimizing bandwidth loss and preventing network information leakage.|
Powerful security and system functions
The QSW-M2108-2S has powerful security and system functions (including ACL, LLDP, RSTP and Flow Control) to help administrators enhance network reliability using access controls, troubleshooting, loop prevention and avoiding packet loss.
Desktop form factor for easy use in offices
With a compact and modern design, the QSW-M2108-2S stands out with its delicate textured surface design. The flexible DC power connector enables universal deployment of the QSW-M2108-2S and each port can be easily identified. Being fully plug-and-play, devices can be simply connected to the QSW-M2108-2S and immediately used.
|Management Type||Web Managed|
|Number of Ports||10|
|Power Supply Description||Adapter|
|Max. Power Consumption||12.17W|
|Input Power Type||AC|
|Input Voltage Range||100 ‒ 240VAC, 50/60Hz|
|MAC Address Table||16K|
|Total Non-Blocking Throughput||80Gbps|
|Energy Efficient Ethernet (IEEE 802.3az complaint)|
|Fan||PWM double ball bearing fan x 1|
|Supported Standards||IEEE 802.3 Ethernet
IEEE 802.3u 100BASE-T
IEEE 802.3ab 1000BASE-T
IEEE 802.3z 1000BASE-SX/LX
IEEE 802.3ae 10G Fiber
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.1Q VLAN Tagging
IEEE 802.1w RSTP
IEEE 802.3ad LACP
IEEE 802.1AB LLDP
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.1p Class of Service
|LED Indicators||Per Port: Speed/Link/Activity
Per System: Power/Status
|Dimensions (HxWxD)||42.5 x 290 x 127 mm|
|Weight (Net)||1.12 kg|
|Weight (Gross)||1.52 kg|
|Operating Temperature||0˚C to 40°C (32°F to 104°F)|
|Relative Humidity||5%–95% (non-condensing)|
|Certifications||CE, FCC, VCCI, BSMI|
|Electromagnetic Compliance||CLASS A|
Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications. Warning: Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting.
* Sound Level Test Environment: Refer to ISO 7779; Maximum HDD loaded; Bystander Position; Average data from 1 meter in front of operating NAS. Designs and specifications are subject to change without notice.
- Pricing and product availability subject to change without notice.
Easy management with web browser.
Our Price: $399.00